Show Cfm Fault - Alaxala AX6700S Software Manual

15. CFM

show cfm fault

Displays the type of failure that has been detected by the CC functionality of CFM, and the
information in the CCM that triggered the failure.
Syntax
show cfm fault [domain-level
cleared}] [detail]
Input mode
User mode and administrator mode
Parameters
domain-level <level>
Displays the failure information for the specified domain level.
ma <no.>
Displays the failure information for the specified MA ID number.
mep <mepid>
Displays the failure information for the specified MEP ID.
{fault | cleared}
fault
Displays only the failure information being detected.
cleared
Displays only the failure information that has been cleared.
Operation when a parameter is omitted
This command can display only the information relevant to the condition applied by a
parameter that has been set. If the parameter has not been set, information is displayed with
no condition applied. If multiple parameters are specified, information conforming to the
conditions will be displayed.
detail
Displays detailed information about a failure.
Operation when this parameter is omitted:
Summary information about a failure is displayed.
Operation when all parameters are omitted:
Summary information about all failures is displayed.
Example 1
The following figure is an example of displaying summary information about a CFM failure.
Figure 15-7: Example of displaying failure information
>show cfm fault
Date 2009/03/21 10:24:12 UTC
MD:7 MA:1000
MD:7 MA:1010
MD:6 MA:100
>
408
<level>
MEP:1000 Fault
MEP:1011 Cleared
MEP:600 Cleared
<no.>
] [ma ] [mep
Time:2009/03/21 10:15:21
Time:-
Time:-
<mepid>
] [{fault |