Setting Wake-Up Profiles - Philips HF367X series User Manual

English
12

Setting wake-up profiles

Set wake-up profile
Duration of the wake-up profile
appliance, you will see the menu as described in the following
sections.
On the display of the appliance you can select and set the wake-up
profile, bedside light, settings, sound (source) or the unwind program.
Note: All your personalized settings and profiles will be permanently
stored in the memory, they will not be erased by removing the
adapter from the electrical outlet. You can change all settings at any
time, the last setting will be stored.
Note: If the display is blank, move your hand towards the lower part of
the Sleep & Wake-up Light to show the display menu. You will see the
menu icons.
In your wake-up profile on the appliance you can set the alarm time,
the maximum light intensity and type of wake-up sound you prefer.
With the SleepMapper app, you can set more wake-up profiles.
Note: Press and hold the alarm icon for 4 seconds to deactivate all set
alarms at once. Press and hold the alarm icon 4 seconds to activate
the alarms again.
You can set 2 different wake-up profiles on the appliance. For each
profile, you can set the time, light intensity, wake-up curve duration,
type of sound and volume. With the SleepMapper app you can set 16
alarms in total, giving you more options to choose the time and day
on which the alarm should go off.
The default duration of the wake-up curve (brightness increase to the
set maximum light intensity) is 30 minutes. The duration can be
changed to your preference by pressing the icon on the appliance.
With the Sleepmapper app you can set different wake-up profiles.