Navigating The Menu; Setting Wake-Up Profiles - Philips HF367 Series Manual

English
12

Navigating the menu

Setting wake-up profiles

1 Start the setup wizard by tapping on the start icon on the display of
the appliance.
2 You will be guided through the setup wizard on the appliance,
where you set the desired settings, a wake-up profile and a
winddown program.
Note: The wake-up profile and the wind-down program can be set
later. Skip these settings by tapping the arrow repeatedly. However,
we advise you to set your wake-up profile and your wind-down
program during this setup. This can help you explore the different
functions of the appliance.
If you have set up your appliance with the help of the SleepMapper
app (see 'Easy Wi-Fi setup') or through the setup wizard (see 'Setting
up your appliance without the app') on the appliance, you will see the
menu as described in the following sections.
On the display of the appliance you can select and set the wake-up
profile, reading light, settings, sound (source) or the unwind program.
Note: All your personalized settings and profiles will be permanently
stored in the memory, they will not be erased by removing the
adapter from the electrical outlet. You can change all settings at any
time, the last setting will be stored.
Note: If the display is blank, move your hand towards the lower part of
the Sleep & Wake-up Light to show the display menu. You will see the
menu icons.
In your wake-up profile on the appliance you can set the alarm time,
the maximum light intensity and type of wake-up sound you prefer.
With the SleepMapper app, you can set more wake-up profiles.
Note: The main display of the appliance shows if the alarm has been
set.
To disable the alarm, press on the disable alarm icon
Note: Press and hold the alarm icon to deactivate all set alarms at
once.
.