Set Wake-Up Profiles - Philips HF3650 Manual

English
10

Set wake-up profiles

Set wake-up profile
Duration of the wake-up profile
Light intensity of the wake-up profile
Type of sound
Note: All your personalized settings and profiles will be permanently
stored in the memory, they will not be erased by removing the
adapter from the electrical outlet. You can change all settings at any
time, the last setting will be stored.
Note: If the display is blank, move your hand towards the lower part of
the Sleep & Wake-up Light to show the display menu. You will see the
menu icons.
In your wake-up profile you can set the time, the maximum light
intensity and the type of wake-up sound you prefer.
Note: Press and hold the alarm button for 4 seconds to deactivate all
set alarms at once. Press and hold 4 seconds to activate the alarms
again.
You can set two different wake-up profiles. For each profile you can
set the time, light intensity, wake-up curve duration, the type of sound
and volume.
The default duration of the wake-up curve (brightness increase to the
set maximum light intensity) is 30 minutes. The duration can be
changed to your preference.
The lamp of the Sleep & Wake-Up Light simulates a sunrise. Like a
sunrise, the brightness of the lamp increases gradually. During this
wake-up curve, the colors of the light changes from soft red to warm
orange to bright yellow. You can choose one of the 25 light intensity
levels.
Note: The main display of the Sleep & Wake-Up Light shows if the
alarm has been set.