Navigating The Menu - Philips HF367X series User Manual

AmbiTrack sensors

Navigating the menu

Note: Make sure your smartphone is connected to the Wi-Fi network
you use in your bedroom.
Note: The app on your smartphone and your connected Sleep &
Wake-Up Light can ONLY communicate with each other when both
appliances are connected to the same home Wi-Fi network.
Note: You cannot enable/disable alarms via the app if you are not
connected to your home Wi-Fi network, for example if your
smartphone is connected to 4G.
This Wi-Fi connection issue icon might appear on the display if a
connection cannot be established. Check the troubleshooting section
to solve the problem (see 'Connectivity troubleshooting').
The connected Sleep & Wake-Up Light collects input from its
surroundings through the AmbiTrack sensors. AmbiTrack sensors
measure light, humidity, temperature and sound pressure. These
factors can influence your sleep. Only in the app you can see
information on the recommended values for ideal sleep conditions.
The measurements of the sensors can be influenced by the
surroundings of the connected Sleep & Wake-Up Light.
For example, if you place the appliance next to a window or near a
heating source such as a radiator, the temperature and humidity
sensors might not represent the temperature / humidity of the entire
room.
You can set up the Sleep & Wake-Up Light without the app. Before
you can use the appliance, a setup wizard on the appliance needs to
be completed first. You can connect the appliance to the app later
(see 'Easy Wi-Fi setup').
1 Start the setup wizard by tapping on the start icon on the display of
the appliance.
2 You will be guided through the setup wizard, where you set the
desired settings, a wake-up profile and a winddown program.
Note: The wake-up profile and the wind-down program can be set
later. Skip these settings by tapping the arrow repeatedly. However,
we advise you to set your wake-up profile and your wind-down
program during this setup. This can help you explore the different
functions of the appliance.
If you have set up your appliance with the help of the SleepMapper
app (see 'Easy Wi-Fi setup') or through the setup wizard (see ' ') on the
English
11