Set Alarm; Select Alarm Source; Set Alarm For Wake-Up - Philips AJ310/12 User Manual

4 Set alarm

Select alarm source

Adjust / / to select different alarm
sources:
• : backlight is activated when alarm time
comes.
• : the selected sound is activated when
alarm time comes.
• : both backlight and sound are activated
when alarm time comes..
Tip
•
You can select the alarm sound when setting the alarm
for wake-up or sleep.
•
The alarm volume cannot be adjusted manually.

Set alarm for wake-up

With this alarm clock, you can set an alarm to
wake you up in the morning.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SET
WAKE for two seconds.
» The hour and minute digits blink.
2
Rotate - hr + to adjust the hour.
3
Rotate - min + to adjust the minute.
4
Press SET WAKE to confirm.
» The sound source blinks.
5
Rotate - hr + or - min + to select an alarm
sound.
6
Press SET WAKE to confirm.
» The alarm settings are displayed.
SET WAKE
r m i n
Tip
•
When alarm sounds, volume rises gradually.
When alarm time comes:
Power Supply Alarm
Duration
AC power Max. 15
minutes
Battery power Max. 5 minutes In green for 1
SET WAKE
2 sec.
SET WAKE
SET WAKE
Backlight
(if selected)
In green for 15
minutes
minute
EN
6