Using The Rotary Dial (Starting From Menu) - Kane 255 Manual

8. USING THE ROTARY DIAL (STARTING FROM
MENU):
Select "Menu" on the rotary dial and navigate using the function buttons.
= Scroll up
ROTARY DIAL POSITIONS
Rotate the dial to MENU and use the UP or DOWN and ENTER
MENU
keys to select the following function for change:
1
2
3
4
5
6 Header – 2 lines each of up to 16 characters that appear on the
7 Gross or Net or Condensing Boiler / Furnace efficiency
8 ppm or mg/m
9 Report
10 Printing select the PRINTER model KMIRP/KANEIRP-2
11 Service – Password protected for service personal only
When you have selected the function to change, press ENTER to
select.
Repeat this to scroll through the menu and select (using the ENTER
key) and change (using the UP / DOWN keys) the function.
The final, logical ENTER returns you to the main menu display.
To exit the Menu function you can normally rotate the dial to another
position - Unless the final logical ENTER is pressed, no changes are
made.
= Scroll down
Time – Uses "Military" time as standard: 7am = 07:00, 7pm =
19:00
Date
Aux. Two pages of two lines to display desired parameters not
currently on the rotary dial.
O2 Ref.
The display's contrast
printout. Use ENTER and UP/DOWN.
3
= Enter
Page 12