Short Instructions - TESTO 325M Instruction Manual

Short instructions for
Please also follow instructions in Instruction manual
Connections
Switching on instrument and selecting fuel
2 Set fuel using or
- Instrument changes to measurement menu and is ready to operate.
Switching off analyser
1 Press to switch off analyser.
2 Wait on automatic rinse.
OFF
- is displayed for 5 s and then the analyser switches off.
Switching background light on/off
Switch background light on or off by pressing
Selecting menu item
1 Open main menu by pressing
2 Use / to select menu item and confirm selection via
If sub-menu is available:
3 Select menu item via
Press to go back one menu level.
Setting date/time
Dat/Clk
1 Select in main menu and press
2 Set value via /
3 Press to confirm settings.

Short instructions

testo 325 M / XL
Mains unit
Probes: Ambient air
temperature (AT) / temperature T2
Probes: Flue gas temperature
(FT) / Temperature T1
Flue gas inlet (red)
Pressure + (blue)
Pressure - (p-)
1 Switch on analyser via
- The following appear:
display test, software version/
power, zeroing phase.
- Instrument changes to fuel
selection.
and confirm selection by pressing
.
/ and press
, change to next value via
.
.
.
.
to confirm.
to confirm.
.
35