Teledyne RD Instruments SENTINEL V SELF-CONTAINED Operation Manual page 240

September 2017
PC4 – Display Voltage Monitor ADC Data
The command shows the raw and converted ADC data for the first four channels:
•
ADCH0 = Vin (VBATT)
• ADCH1 = Iin
•
ADCH2 = Vio
•
ADCH3 = Vcore
>pc4
Battery ADC data is sampled and displayed in a loop.
Press any key to exit the loop.
Count Chan0 Chan1 Chan2
\ 93 c088 0d60
>
PC40 – Display Scrolling Voltage Monitor ADC Data
PC40 is the same as PC4 except the data is displayed in a repeating loop at approximately 0.5-sec update
rate.
>pc40
Battery ADC data is sampled and displayed in a loop.
Press any key to exit the loop.
Count Chan0 Chan1 Chan2
0 c088 0d60
0 c088 0d60
0 c088 0d60
0 c088 089c
0 c088 0d60
0 c088 089c
0 c088 122e
0 be26 0d60
>
Page 224
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Chan3 Vin(cV)
9644 fc74 1709.188
Chan3 Vin(cV)
98a6 f54e 1709.188
98a6 fc74 1709.188
9644 fc74 1709.188
9644 0ac0 1709.188
98a6 f2ec 1709.188
98a6 11e6 1709.188
98a6 f7b0 1709.188
98a6 fa12 1708.517
Iin(cA) Vio(cV) Vcore(cV)
6.896 342.340 183.410
Iin(cA) Vio(cV) Vcore(cV)
6.896 342.438 183.227
6.896 342.438 183.410
6.896 342.340 183.410
6.774 342.340 183.776
6.896 342.438 183.166
6.774 342.438 183.959
7.019 342.438 183.288
6.896 342.438 183.349
Sentinel V SC and RT Operation Manual