Teledyne RD Instruments SENTINEL V SELF-CONTAINED Operation Manual page 14

•
Updated the compass calibration procedure in chapter 5.
July 2013
•
Added a Compass Calibration Guide and updated the compass calibration procedure.
•
Changed input power from +9 to 24VDC to +12 to 20VDC.
•
Updated graphics to show longer housing.
•
Added table showing supported operating systems and browsers.
•
Added IP address 192.168.0.2 to Wireless Connection section.
•
Corrected sign convention for the Pitch and Roll table on page 29.
•
Updated ReadyV screen captures for data recorder and built-in tests.
•
Updated the ReadyVLite chapter.
•
Updated specifications and outline installation drawings.
•
Updated Troubleshooting section.
December 2012
•
Changed time the network is available after power up from three minutes to two.
•
Updated ReadyV system panel screen capture.
•
Added ReadyVLite chapter.
•
Added battery Velcro
•
Added creating, opening, and deleting scenario files.
•
Added Sentinel V Bandwidth specification.
•
Updated description for range.
•
Updated applying antifouling paint section.
•
Added minimum screen resolution to Computer Considerations section.
March 2012
•
Updated Maintenance panel screen capture and log file descriptions.
•
Added Recommended Minimum Blank Distance table.
February 2012
•
Updated Wireless Connection Common Issues section.
•
Updated compass calibration procedure.
•
Updated Starting and Stopping Deployments section.
•
Updated figure 10 raw roll signs/headings.
•
Updated System Setup panel (Orientation removed).
•
Changed name of VWeb to ReadyV.
•
Added Appendix B - GPL Compliance Notice.
December 2011
•
Initial release of the manual.
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
strap and updated exploded system views.
®
Page xiv