Continuity Measurement - AEMC 565 User Manual

Trms leakage current clamp-on meter

Hide thumbs Also See for 565:

Table of Contents

4.6 Continuity Measurement

• Turn the rotary range switch to the

• Insert red test lead to the red "+" input jack and the

black lead to the black "COM" input jack.

• Bring the test probe tips into contact with the sample

under test.

• If the resistance is less than 40Ω, the beeper emits a

continuous sound.

Clamp-on Meter Model 565

roducts Online at:

WARNING: When testing Continuity, make sure

that there is no power in the tested sample or

circuit (dead circuit). Also make sure the current

is fully discharged. This may be checked by

using the voltage functions.

Short circuit

with beep

GlobalTestSupply

www.

range.

Open circuit

no beep

.com

sales@GlobalTe

Table of Contents