Frequency Measuring Using Current Input - AEMC 565 User Manual

4.7 Frequency Measuring Using
• Turn the rotary range switch to the
• Press the lever to open the jaws.
• Clamp the jaws around the conductor to be mea-
sured.
22
roducts Online at:
Current Input
WARNING: When performing a Frequency
measurement, you should either use the voltage
signal or current signal, but never both together.
If both sources are applied an error reading will
occur.
GlobalTestSupply
www.
range.
Clamp-on Meter Model 565
.com
sales@GlobalTe