Ssh; Local Users (Role-Based Authentication); Viewing User Accounts; Adding A User Account - Harris RF-7800W-OU470 Installation & Operation Manual

R
3.6.2.2

SSH

The SSH service can be turned on and off. A host key is pre-installed, but can be overwritten with a user-generated
host key. Refer to Paragraph
3.6.3

Local Users (Role-Based Authentication)

The subsections below describe Users Management Interfaces configuration parameters. All parameters for Users
Management can only be accessed using GUI or CLI interfaces. See
3.6.3.1

Viewing User Accounts

The list of accounts that are able to access the GUI and CLI can be viewed from each interface. Each account has a
password, group, SNMP v3 Authentication and SNMP v3 Privacy method assigned. These accounts are designed
for Role-Based authentication, defined by the account groups. If User-Based authentication is required, a separate
RADIUS server can be used to expand the number of possible user accounts beyond the five account limit.
3.6.3.2

Adding a User Account

User accounts can be added to the list by members of the Admin group. An Admin account user name and password
is required before a new user account can be added. New user account passwords must be longer than eight
characters.
3.6.3.3

Changing a User Account

User accounts can be modified by members of the Admin user group. An Admin account user name and password
is required before an account can be modified. User accounts are permitted to modify their own password.
3.6.3.4

Deleting a User

User accounts can be deleted by members of the Admin user group. An Admin account user name and password is
required before a user account can be deleted.
3.10.2.
SYSTEM ADMINISTRATION AND CONFIGURATION
GUI CLI
GUI CLI
Figure 3-6.
RF-7800W
3-9