Current Port Speed; Statistics; Addressing; Ip Address - Harris RF-7800W-OU470 Installation & Operation Manual

RF-7800W
SYSTEM ADMINISTRATION AND CONFIGURATION
3.5.1.3

Current Port Speed

When the radio is set to automatically detect the Ethernet port settings, this is the port speed and duplex setting that
is detected and in use.
3.5.2

Statistics

The radio logs the number of Ethernet data packets that have been transmitted and received. The radio also provides
the number of packets that are received with errors, which could indicate problems with the port speed or duplex
settings.
3.5.2.1

Addressing

The subsections below describe Addressing configuration parameters. All parameters for Addressing can be
accessed using GUI, CLI, and SNMP interfaces.
3.5.2.2

IP Address

This is the IP address of the radio's management interfaces. The factory default address is 192.168.26.2.
3.5.2.3

Subnet Mask

This is the subnet mask of the radio's management interfaces. The factory default for this address is 255.255.255.0,
which means that only devices with a 192.168.26.x IP address can access the radio.
3.5.2.4

Default Gateway

This is the default gateway of the radio's management interfaces. The factory default for this address is 192.168.26.1.
If access to the radio's management interfaces is needed from multiple subnets, this address must be the IP address
of a router that can forward traffic to and from those subnets.
3-6
GUI CLI SNMP
R