Download Print this page

MicroNet SP508B User Manual

100 mbps fast ethernet hub

Advertisement

Quick Links

Specifications

Standards
IEEE 802.3~ Fast Ethernet 1 00Base-TX
two-level hub network
C o n n e c t o r
8 RJ45 TP jacks, Port 1 with an additional RI-45 jock 'l/MPR' for uplink
to other hub
C a b l e
Cat. 5 UTP cable
C a b l e l e n g t h l i m i t a t i o n s
Node to Node
Node
Hub
1OOM
to
Hub to Hub
5M
Data Transfer Mode /
Half-duplex 1 OOMbps
S p e e d
link/Act and Parition
hub
A C - D C P o w e r A d a p t e r
A C I n p u t
D C
O u t p u t : -I
A m b i e n t
T e m p e r a t u r e
H u m i d i t y
5% to 90%
D i m e n s i o n s
E m i s s i o n
FCC Port 15 Class A and CE Mark
Faster
Easier Networks
and
The produci speclfcalion IS subject to change without notice Micranet. MicroView. EtherFasl are ngisfersd lrademerks 01
Class II Hub (Repeater), supports
205M
fo each TP port, Power, Collision ond Utilization for
Mbps Fast Ethernet Hub
Before you start installing the SPSOB Fast Ehtemet Hub, verify that the package contains
the following items:
n
AC-DC Power Adapter
n
This User's Manual
Please notify your sales representative immediately if any of the aforementioned items is
missing or damaged.
Overview
The SP508B Fast Ethernet hubis a standard 1 OOBasc-TX hub that meets all IEEE 802.3~
Ethernet Standards. Fast Ethernet hub is a cost-effective solution for easing your network
congestion problem on existing 1 OBase-T network, it offers a seam.Lcss migration path to
1 OOMbps and multiplies the network performance up to factor of ten. This increases the
overall network transmission and improves the network cffrcicncy to accommodate
today and future high-bandwidth applications, such as multimedia, imaging and
CAD/CAM, etc.
Installation
The installation procedures arc as below:
Use CAT. 5 UTP cable, connect hub to workstations.
2. Repeat the above step, as needed for each W-115 port to be connected to a
TX device.
3.
two-level hubs.
4. Verify that the voltage of AC power is correct and insclt AC adapter cable's plug into
power jack. Then, plug AC power adapter to the AC outlet.
Easier Nehvorks
Faster

Advertisement

loading
Need help?

Need help?

Do you have a question about the SP508B and is the answer not in the manual?

Questions and answers

Summary of Contents for MicroNet SP508B

  • Page 1: Specifications

    E m i s s i o n FCC Port 15 Class A and CE Mark The SP508B Fast Ethernet hubis a standard 1 OOBasc-TX hub that meets all IEEE 802.3~ Ethernet Standards. Fast Ethernet hub is a cost-effective solution for easing your network congestion problem on existing 1 OBase-T network, it offers a seam.Lcss migration path to...
  • Page 2 Utilization Front Panel The first row of the LEDs is active as utilization indicators for monitoring the network The front panel of the SPSOSB Fast Ethernet Hub is shown below: Multiple Hub Connection A standalone hub supports hub to 8 twisted-pair devices. IEEE 802.3~ Class II hub can bc connected up to two-level network.