SimCom SIM7000G User Manual page 3

Compliance Information
FCC Compliance Statement: This device complies the FCC Rules . Operation is subject to the
following two conditions: 1. This device may not cause harmful interference, and 2. This device
must accept any interference received, including interference that may cause undesired operation.
This device must accept any interference received, including interference that may cause undesired
operation. Product that is a radio transmitter is labeled with FCC ID.
FCC Caution:
(1)Exposure to Radio Frequency Radiation. This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and must not be collocated or
operating in conjunction with any other antenna or transmitter. End-users and installers must be
provided with antenna installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device could void
the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
(5) the modules FCC ID is not visible when installed in the host, or
(6) if the host is marketed so that end users do not have straight forward commonly used methods
for access to remove the module so that the FCC ID of the module is visible; then an additional
permanent label referring to the enclosed module: Contains Transmitter Module FCC ID: 2AJYU-
SIM7000G or Contains FCC ID: 2AJYU-SIM7000G must be used.
This product is suitable for collocation internal and external antenna.Gain the scope of the
reference is as follows:
Frequency Band Antenna Gain reference (dBi)
GSM 850
GSM 1900
NB-IOT Band2
NB-IOT Band5
NB-IOT Band12
NB-IOT Band13
NB-IOT Band17
NB-IOT Band26
CAT-M1 Band2
CAT-M1 Band4
CAT-M1 Band5
CAT-M1 Band12
CAT-M1 Band13
CAT-M1 Band26
SIM7000 _Hardware Design _V1.00
≤6.0
≤10.0
≤10.0
≤6.0
≤6.0
≤6.0
≤6.0
≤6.0
≤10.0
≤10.0
≤6.0
≤6.0
≤6.0
≤6.0
Smart Machine Smart Decision
2017-05-23