Table of Contents
Advertisement
OLIMEX© 2018
CHAPTER 1 OVERVIEW
1. Introduction to the chapter
Thank you for choosing the STM32-H407 single board computer from Olimex! This document
provides a user's guide for the Olimex STM32-H407 board. As an overview, this chapter gives the
scope of this document and lists the board's features. The differences between the members of the
OLIMEX STM32 F407 boards are mentioned. The document's organization is then detailed.
The STM32-H407 development board enables code development of applications running on the
microcontroller STM32F407ZGT6, manufactured by STMicrocontrollers.
1.1 Features
STM32F407ZGT6 Cortex-M4 210DMIPS, 1MB Flash, 196KB RAM, 3×12-bit 2.4 MSPS
A/D, 2×12-bit D/A converters, USB OTG HS and USB OTG HS, Ethernet, 14 timers, 3 SPI,
3 I2C, Ethernet, 2 CANs, 3 12 bit ADCs, 2 12 bit DACs, 114 GPIOs, Camera interface
JTAG connector with ARM 2×10 pin layout for programming/debugging
UEXT connector
USB host
USB-OTG
SD-card
Input DCDC power supply which allows operation from 6-16VDC source
Power and user LEDs
Reset and user buttons
Arduino shield platform with provided headers
4 full 20-pin ports with the external memory bus for add-on modules
PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
Dimensions: 90×76 mm (3.54×3")
Page 5 of 30
STM32-H407 user's manual
Advertisement
Table of Contents
