Installation Guidelines; Dimension Drawing; Installation Proposal - Atlas Copco SF 15+ Instruction Book

4

Installation guidelines

4.1

Dimension drawing

The dimension drawings can be found on the DVD or the USB, supplied with the compressor.
Model
SF 15+, SF 17+, SF 22+ metric
SF 15+, SF 17+, SF 22+ imperial
SFD 11+, SFD 15+, SFD 22+ metric
SFD 11+, SFD 15+, SFD 22+ imperial
Hereby a list of commonly used terms with their translation:
Text on drawings
COOLING AIR OUTLET OF AFTERCOOLER
AND DRYER
COOLING AIR OUTLET OF COMPRESSOR
AMBIENT SENSOR
CABINET VENTILATION
COMPRESSED AIR OUTLET
ELECTRIC CABLE PASSAGE / POWER
SUPPLY CABLE
MANUAL DRAIN
AUTOMATIC DRAIN
CENTER OF GRAVITY
COOLING AIR INLET OF AFTERCOOLER AND
DRYER
COOLING AIR INLET OF COMPRESSOR AND
CABINET
COMPRESSOR MOUNTING HOLES
CENTER OF GRAVITY DIMENSIONS AND
MASS
4.2

Installation proposal

Outdoor/altitude operation
76
If the compressor is installed outdoors or if the air inlet temperature can be below 0 °C
(32 °F), precautions must be taken. In this case, and also if operating at high altitude,
consult Atlas Copco.
Translation or Explanation
Cooling air outlet of aftercooler and dryer
Cooling air outlet of the compressor
Sensor to measure the ambient temperature
Ventilation outlet opening for cabinet
Compressed air outlet
Opening for power supply cable
Manual drain valve
Automatic drain outlet
Location of center of gravity
Cooling air inlet of aftercooler and dryer
Cooling air inlet for compressor and cabinet
Location of anchoring points to fixate the compressor
Location of the center of gravity and mass
Instruction book
Dimension drawing number
9820 7460 00–01
9820 7460 00–02
9820 7503 00–01
9820 7503 00–02
2920 7140 52