Atlas Copco SF 15+ Instruction Book page 34

Text on image
(1)
(2)
(3)
(4)
(5)
(6)
• Section A shows information regarding the compressor operation (e.g. the outlet pressure,
the ambient temperature or the temperature at one of the compressor element outlets).
• Section B shows Status icons. Following icon types are shown in this field:
• Fixed icons
These icons are always shown in the main screen and cannot be selected by the cursor
(e.g. Compressor stopped or running).
• Optional icons
These icons are only shown if their corresponding function is activated (e.g. week timer,
automatic restart after voltage failure , etc.)
• Pop up icons
These icons pop up if an abnormal condition occurs (warnings, shutdowns, service,...)
To call up more information about the icons shown, select the icon concerned using the
scroll keys and press the enter key.
• Section C is called the Status bar
This bar shows the text that corresponds to the selected icon.
• Section D shows the Action buttons. Depending on the situation, these buttons are used:
• To call up or program settings
• To reset a motor overload, service message or emergency stop
• To have access to all data collected by the regulator
The function of the buttons depends on the displayed menu. The most common functions
are:
Designation
Menu
Modify
Reset
To activate an action button, highlight the button by using the Scroll keys and press the
Enter key.
To go back to the previous menu, press the Escape key.
Chart views
Instead of viewing values, it is also possible to view a graph of one of the input signals (see
section Inputs
32
Compressor Outlet
Element 2 Outlet
Off, Shutdown,... (text varies upon the compressors actual condition
Menu
Element 1 Outlet
Ambient Air
Function
To go to the menu
To modify programmable settings
To reset a timer or message
menu) in function of the time.
Instruction book
2920 7140 52