Configure The Network Settings - Hach CM130 User Manual

3. Select Date.
4. Enter the current date.
To erase characters, select
5. Select Continue.
6. Select Time.
7. Select am or pm.
8. Enter the current time.
To erase characters, select
9. Select Continue.

Configure the network settings

Enter the TCP/IP addresses of the analyzer, subnet mask, default gateway and network time
protocol (NTP) server(s). The TCP/IP addresses are supplied by the network administrator.
1. Push menu.
2. Select Settings.
3. Select an option. Refer to
Option
Static IP
Subnet IP
Gateway IP
Primary NTP IP
Secondary NTP IP (Optional) Sets the TCP/IP address of the network time protocol (NTP) server for the
4. After the TCP/IP addresses are entered, select Reset.
5. When the reset is complete, push back.
Figure 17 Settings Screen—Static IP
46 English
and push ok.
and push ok.
Figure 17.
Description
Sets the TCP/IP address of the analyzer.
Sets the TCP/IP address of the subnet mask for the analyzer.
Sets the TCP/IP address of the default gateway for the analyzer.
(Optional) Sets the TCP/IP address of the primary network time protocol (NTP) server
for the analyzer. The NTP server supplies the date and time to the analyzer.
analyzer that is used if communication with the primary NTP server is lost.
Note: Make sure to configure the primary NPT IP before the secondary NTP IP is
configured.