Items To Collect - Hach CM130 User Manual

Items to collect

Collect the items that follow to install the instrument. The items that follow are supplied by the user.
Get the TCP/IP addresses of the analyzer, subnet mask, default gateway and network time protocol
(NTP) server(s) from the network administrator to configure the instrument. Refer to
network settings on page 46.
Fasteners
for the
analyzer
(4x)
Fasteners
for the
remote
indicator
(2x)
Cross-
slotted
screwdriver
Flat-bladed
screwdriver,
small
Flat-bladed
screwdriver,
medium
Drill
Flashlight
12
Use fasteners applicable to the mounting surface (¼-in. or 6 mm SAE J429-Grade 1 bolts or
stronger).
13
Refer to Table 1 on page 3 for specifications.
14
Use fasteners applicable to the mounting surface.
14 English
12
14
CAT5e/CAT6 cable
for remote indicator
13
connection
Sample filter (Y-
strainer) for ¼-inch
OD tubing,
100 mesh, 149 µm
or smaller
(Optional) Shut-off
valve for ¼-in. ID
tubing
Level
Crimper tool
Wire strippers
Gloves
Configure the
Ethernet
cable for
network
13
connection
CAT5 cable
stripper
Tape
measure
Safety
glasses
Wire cutters
Tubing
cutter