Overview: Altronix Entrada2DMK IP access FACP adapter kit is specifically designed to interface with Network Door Controllers. They route power (PoE/PoE+) from a PoE switch or Midspan to the Network Door Controller and accommodate up to two (2) Fail-Secure strikes or Fail-Safe mag locks. The receiver features a supervised Fire Alarm Disconnect which releases locking devices while maintaining power to the Network Door Controller.
Compliance • CSFM - California State Fire Marshal Approved. • CE - European Conformity. Weights Entrada2DMR: Product: 0.25 lbs. (0.11kg) | Shipping: 0.42 lbs. (0.19kg) (approx.) Entrada2DMT: Product: 0.48 lbs. (0.22kg) | Shipping: 0.66 lbs. (0.30kg) Entrada2DMK - 3 -...
Page 4
+ --- + --- E Yellow - Output 1 ON F Green - Output 2 ON G Green - PoE Output ON H Yellow - PoE Input ON Listed Door Wet Trigger Input Controller + --- + --- - 4 - Entrada2DMK...
Page 5
ON - Dry Contact OFF - Supervised --- SW1--- ON - Dry Contact OFF - Supervised Fig. 3 - Entrada2DMT PC Board Fig. 3a Voltage --- SW1 --- Selector Switch --- SW2--- Fire Alarm FACP Disconnect Switches Entrada2DMK - 5 -...
Page 8
Notes: Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A. MEMBER IIEntrada2DMK A07S - 8 -...
Need help?
Do you have a question about the Entrada2DMK and is the answer not in the manual?
Questions and answers