Meter Display - ACONLABS On Call Vivid User Manual

Meter Display

Blood Drop /
Strip Symbol
Test Result
Area
Memory
Ketone
Battery Symbol: Warns when you should replace the battery.
Blood Drop / Strip Symbol: Wait for the Blood Drop / Strip Symbol to appear
before applying the sample. These two symbols appear at the same time.
Pound Sign (#): Appears with the control solution test result or when you mark an
invalid result to prevent it from being included in the average.
Control Solution Symbol: Indicates a control test result. A pound sign (#) will also
be displayed when control solution symbol appears.
Test Result Area: Indicates test result.
Measurement Unit: Only one unit will be displayed on your meter. It cannot be
adjusted.
Hyper Symbol: Appears when the blood glucose concentration is above the target
"Hyperglycemia" (high blood sugar) level that you have set.
Hypo Symbol: Appears when the blood glucose concentration is below the
"Hypoglycemia" (low blood sugar) target level that you have set.
Ketone: Appears when the blood glucose concentration is above 300 mg/dL. This
simply suggests that a ketone test is recommended. Consult your doctor about
testing for ketones.
Note: This symbol does not mean that the system has detected ketones. It
recommends that a ketone test should be taken.
Memory: Shows a test result stored in memory.
Test Remind Symbol: Appears to remind you to test your blood glucose.
Before Meal Symbol: Appears when before-meal test results are displayed.
After Meal Symbol: Appears when after-meal test results are displayed.
Month Day
Hypo Symbol
Hour Minutes
Hyper Symbol
6
Battery Symbol
Pound Sign (#)
Control Solution Symbol
Test Remind Symbol
Before Meal Symbol
After Meal Symbol
Measurement Unit