Using The Meter Memory; Viewing Stored Records - ACONLABS On Call Vivid User Manual

The meter stores up to 500 test records. Each record includes the test result, time
and date. If the memory is full, the oldest record will be erased to make room for a
new one.
The meter will also calculate the average values of records from the last 7, 14, 30,
60 and 90 days.

Viewing Stored Records

To view stored records:
1. Press the M button to turn the meter on and enter memory mode. The most
recent value and the word "MEM" will appear on the display.
2. If you are using the meter for the very first time, the meter display will show
three dashed lines (- - -), the word "MEM" and the unit of measure. This shows
that no data have been stored in memory.
3. The date and time will be displayed together with the results stored in memory.
A pound sign (#) indicates records that will be omitted from the 7, 14, 30, 60
and 90-day averages.
4. Press the M or S button to view the previous or next stored records.
Press the Power button to view the data averages. The words "DAY AVG" will
appear on the screen.
Note: If you do not wish to view an average of your readings, you can press the

Using the Meter Memory

31