ACONLABS On Call Vivid User Manual page 17

Press the M or S button to turn the meter beep "On" or "Off". Press the Power
button to confirm your selection.
7. Ketone Indicator: The meter comes with the Ketone
indicator feature disabled. Press the M or S button to
turn the Ketone indicator "On" or "Off". Press the Power
button to confirm your selection. When the Ketone
indicator is enabled, if the test result is higher than 300
mg/dL the symbol of "Ketone?" will appear on the
display.
8. Hyper Indicator: The meter comes with the Hyper
indicator feature disabled. Press the M or S button to
turn the Hyper indicator "On" or "Off". Press the Power
button to confirm your selection. When the Hyper
indicator is "Off", pressing the Power button will go to
the next Hypo indicator set up. When the Hyper
indicator is "On", pressing the Power button will go to
the Hyper indicator level set up. At the Hyper level set up, press the M or S
button to adjust the Hyper level. Press the Power button to go to the Hypo
indicator set up.
Note: The meter allows the hyperglycemia level to be as low as 120 mg/dL or
higher. The hyperglycemia level should be above the hypoglycemia level.
Consult your doctor before determining what your hyper blood glucose level is.
9. Hypo Indicator: The meter comes with the Hypo
indicator feature disabled. Press the M or S button to
turn the Hypo indicator "On" or "Off". Press the Power
button to confirm your selection. When the Hypo
indicator is "Off," pressing the Power button will go to
the Test Reminder set up. When the Hypo indicator is
"On", pressing the Power button will go to the Hypo indicator level set up. At
the Hypo level set up, press the M or S button to adjust the Hypo level. Then
15