Hi" And "Lo" Messages - ACONLABS On Call Vivid User Manual

If an error message appears on the display, refer to the Troubleshooting
Guide on page 42. If a "HI" or "LO" error appears on the display, refer to "HI"
and "LO" messages below.
5. Record valid results in your logbook with the date and time, and compare them
to the target goals set by your doctor. Refer to Suggested Testing Times and
Target Goals on page 39 or your logbook for more details on your target blood
glucose level goals.
6. Slide forward the strip ejector to discard the used test
strip.
Note: Dispose of blood samples and materials
carefully. Treat all blood samples as if they are
infectious materials. Follow proper precautions and
obey all local regulations when disposing of blood
samples and materials.

"HI" and "LO" Messages

The meter can accurately measure blood glucose concentrations between 20 to
600 mg/dL. "HI" and "LO" messages indicate results outside of this range.
If "HI" appears on the display, the measured concentration
value is above 600 mg/dL. The test should be retaken to
ensure that no mistake was made in the procedure. If you
are certain the meter is functioning properly and no
mistakes were made in the procedure, and your blood
glucose is still consistently measured as "HI", it indicates
severe hyperglycemia (high blood glucose). You should
contact your doctor immediately.
29