ACONLABS On Call Vivid User Manual page 30

DO NOT:
• Apply sample to the front or back of the test strip.
• Smear the blood drop onto the test strip.
• Press your finger against the test strip.
4. The meter will count down from 5 to 1 and then display the measurement
results. The meter will beep to indicate that measurement is complete. Then
your blood glucose level will display on the screen. The measurement unit, date,
and time of the test will also be displyed.
Blood Glucose results are automatically stored in the memory. To mark invalid
results and to prevent them from being included in the 7, 14, 30, 60 and 90-day
averages, press the M and S buttons together. A pound sign (#) will appear on
the display. This shows that the result will not be included when calculating the
7, 14, 30, 60 and 90-day averages. If a result is marked by accident, press the
M or S button to unmark the result. After marking the invalid result with a pound
sign (#), press the Power button to confirm the invalid result. After marking the
invalid result, run the test again with a new test strip.
When the meal marker feature is turned on and a test result is displayed, mark
the result as "before meal", "after meal", or invalid.
• Press the M and S buttons together to display the "before meal marker"
symbol. This indicates that the result was taken before a meal.
• Press the M button again to display the "after meal marker" symbol. This
indicates that the result was taken after a meal.
• Press the M button again to display the pound sign (#). This indicates an
invalid result.
• Press the M button again then none of the above markers will be displayed
for the result.
After this, press the Power button to confirm the selection as either a "before
meal marker", "after meal marker", "invalid result pound sign" or none of these
three symbols. If an invalid result is marked, run the test again with a new test
strip.
28