Meter Setup Before Testing - ACONLABS On Call Vivid User Manual

Before using your meter for the first time, you will need to adjust the settings that
are listed in detail below.
1. Meter Setup Mode: Press the S button for 2 seconds to enter the meter setup
mode. The meter will automatically enter the setup mode when turned on for
the first time.
2. Clock: Set the clock to 12 or 24 hour mode. Press the M or S button to switch
between the two settings. Then press the Power button to save your choice.
Now you can start to set the year, month and date.
Note: The clock needs to be reset after replacing the battery.
3. Date: The year will appear at the top of the display. Press the M or S button to
increase or decrease the year. Once you have selected the correct year, press
the Power button to save your choice. Then you can start to set the month.
Press the M or S button to increase or decrease the month. Then press the
Power button to save your choice. You can now start to set the date. Press the
M or S button to increase or decrease the date. Then press the Power button
to save your choice. Then you can start to set the time.
4. Time: The hour will appear at the top of the display. Press the M or S button to
change to the correct hour. Press the Power button to save your choice and
set the minutes. Press the M or S button to change to the correct minute. Press

Meter Setup Before Testing

Year Month
OR
13
Date