CMA Dishmachines UC65e Quick Setup Instructions page 2

UC65e
Quick Setup
Instructions
WARNING: Electrical and
plumbing connections need
to be made by a qualified
service person who will
comply with all available
Federal, State and Local
Health, Electrical, Plumbing
and Safety codes.
NOTE: To prevent Heating Element
damage, the UC65e heater must be
filled with water before the heating
element is energized. For this reason
the High Liimit Switch has
intentionally been disconnected
at the factory and will require
re-connection.
STEP
5
Push the power button to turn on the dishmachine.
Wash tank will fill automatically.
STEP
8
Push the "START" button to activate the
dishmachine.
UC65e FRONT VIEW
6
STEP
6
After filling dishwasher for the first time, (CAUTION:
turn power supply off) reconnect the factory
unplugged wire to booster high-limit switch located
behind front panel.
STEP
9
Push the power button (STEP 5) to turn power off.
When draining the dishmachine, remove overflow
tube located inside the wash tank.
an Ali Group Company
The Spirit of Excellence
POWER
START
DRAIN
EXTENDED
WASH
DETERGENT
RINSE/PRIME
OVERFLOW
TUBE
RINSE TEMP
WASH TEMP
FINAL RINSE
STEP
7
The chemical pumps must be primed (using the
prime switch) before the dishmachine is operated .
STEP
10
With the overflow tube removed, push drain button
to empty dishmachine. Reinstall overflow tube when
drain cycle is complete.
5
8
10
7
9
11-2016