Output And Input Data - Danfoss VLT Soft Starter MCD 600 Installation Manual

Installation Guide | DeviceNet Card

3.4.1 Output and Input Data

Table 2: Master/Slave Polled I/O Output Data Structure
Byte Bit
0 0
1
2
3–7
1 0–1
2–7
Table 3: Master/Slave Polled I/O Input Data Structure
Byte Bit Function
0 0 Trip
1 Warning
2 Running
3 Reserved
4 Ready
5 Operating mode
6 Command source
7 At reference
Danfoss A/S © 2018.10
Function
0=Stop command
1=Start command
0=Enable start or stop command
1=Quick stop (coast to stop) and disable start command
0=Enable start or stop command
1=Reset command and disable start command
Reserved
0=Use soft starter remote input to select motor set
1=Use primary motor set when starting
2=Use secondary motor set when starting
3=Reserved
Reserved
Value
1=Tripped
1=Warning
0=Unknown, Not ready, Ready to start, or Tripped
1=Starting, Running, Stopping, or Jogging
0=Start or stop command not acceptable
1=Start or stop command acceptable
0=Programming mode
1=Operating mode
0=Remote LCP, Digital input, Clock
1=Network
1=Running
Configuration
AQ277154750780en-000102 / 175R1182 | 9