Parameter Handling; Parameter Object - Danfoss VLT Soft Starter MCD 600 Installation Manual

Installation Guide | DeviceNet Card

5 Parameter Handling

5.1 Parameter Object

The device supports parameter objects through explicit messaging. Soft starter parameters can be uploaded (written) and
downloaded (read) using DeviceNet management software. When the device is powered up, it automatically obtains parameter
information from the soft starter.
Detail Value (hex)
Class 0F
Instance 1–xxx
Attribute ID 01
Get service 0E
Set service 10
14 | Danfoss A/S © 2018.10
Comment
Parameter object class
xxx = maximum soft starter parameter number
Always 0x01
Read single soft starter parameter value
Write single soft starter parameter value
Parameter Handling
AQ277154750780en-000102 / 175R1182