Step 4 Create Array - HighPoint SSD7110 Installation Manual
Windows
Hide thumbs
Also See for SSD7110:
- User manual (46 pages) ,
- How to install (6 pages) ,
- Installation manual (8 pages)
Table of Contents
Advertisement
SSD7110 Controller Windows Installation Guide
Step 4 Create Array
a. Attach three NVMe SSD to SSD7110 Controller ;
Note
Make sure your USB flash partition format is NTFS or FAT32.
b. Boot, in the presence of the motherboard Log screen, there will be NVMe SSD
information：
c. Enter the motherboard's Boot List and select start from UEFI USB flash:
d. Command "mode", "mode 160 53" to change the resolution:
4/9
Advertisement
Table of Contents
