HighPoint SSD7110 Installation Manual page 8

SSD7110 Controller Windows Installation Guide
h. After load the driver, back to "Where do you want to install Windows?" interface, the three
Legacy disk have become RAID partitions. For windows server, it will prompt "Windows
Can't be installed on this driver.",you should click this point and click OK.
i. After partitioning, continue installing and complete the installation of the Windows.
j. After the Windows is installed,please get into Windows and turn off Hibernation.
Hibernation fails when the system is installed on a NVMe RAID, this bug will affet fast
startup and sleep.Please use administrator privileges to turn off hibernation with the
following command in cmd:
#powercfg /h off
Appendix A
Support command: help/info/quit/exit/create/delete.
 Create Command
Syntax
Create Array Type (RAID0/RAID1/RAID5) Member Disk list (1/1,1/2|*)Capacity(100|*)
Examples
<<< create RAID0
<<< create RAID0 *
<<< create RAID0 * *
Create RAID0 array with all disks and with maximum capacity.
<<< create RAID1 1/1, 1/3 10
Create RAID1 array with disk 1/1 and 1/3 and with 10GB capacity.
<<< create RAID5 * 40
Create RAID5 array with all disk and with 40GB capacity.
<<< create RAID5 1/1, 1/2,1/3 50
Create RAID5 array with disk 1/1, 1/2, and 1/3 and with 50GB capacity.
8/9