Step 4 Create Array; Step 5 Prepare The Driver Diskette - HighPoint SSD7000 Installation Manual

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

Step 4 Create Array

a. Attach two NVMe SSD to SSD7000 Controller;
b. Boot, enter the motherboard's Boot List and select start from UEFI USB flash:
c.
Command "ArrayCreate.efi" to enter the Utility:
d. Command "create RAID0".
Create RAID0 array with all disks and with maximum capacity.
e. Command "exit"；
f. For more command usages, refer to

Step 5 Prepare the Driver Diskette

Extract HighPoint_NVMe_Rocky_Linuxxx.xx_x86_64_vx.x.x_xx_xx_xx.tar.gz to top(/)
directory of an USB flash drive. It will look like:
Appendix A.
- 4 -