Step 4 Create Array - HighPoint SSD7103 Installation Manual
Nvme raid controller
Hide thumbs
Also See for SSD7103:
- Installation manual (15 pages) ,
- Quick installation manual (9 pages) ,
- Installation manual (11 pages)
Table of Contents
Advertisement
SSD7103 Controller Windows Installation Guide
Step 4 Create Array
a. Attach three NVMe SSD to SSD7103 Controller ;
Note
Make sure your USB flash partition format is NTFS or FAT32.
b. Boot, in the presence of the motherboard Log screen, there will be NVMe SSD
information：
c. Enter the motherboard's Boot List and select start from UEFI USB flash:
5/11
Advertisement
Table of Contents
