Table of Contents
Advertisement
RR64xL UEFI Windows BootRAID Installation Guide
How to install Windows to the RAID controller
Step 1 Preparing the USB Flash Drive
When preparing the USB flash dive, make sure to format the USB partition as FAT32. If another file system
is used, the USB drive may not be properly recognized, and will not appear as an option under the
motherboard's UEFI BIOS menus.
Step 2 Preparing the UEFI Package
The package must be unzipped directly to the root of the bootable USB flash drive (do not extract the
contents to a new folder). All of the following items must be present in the root of the USB flash drive.
For example (RR640L)
Note: If the above content is not present in the root directory, the UEFI boot device will not be properly
recognized, and/or you will be unable to create an array for OS installation.
Step 3 Creating the RAID Array
a.
Insert the USB flash drive to the motherboard.
b. Booting from the UEFI USB flash and enter the UEFI environment;
3
Advertisement
Table of Contents
