HighPoint SSD7110 Installation Manual page 3

SSD7110 Controller Windows Installation Guide
SSD7110 is connected to motherboard CPU1 Slot 1 PCI-E X16,then you should set "CPU1
Slot 1 PCI-E X16 OPROM" to "EFI";
c. Disable "Secure Boot", set "Attempt Secure Boot" to "Disabled".
Step 3 Flash UEFI Rom to SSD7110
a. Unzip SSD7110 UEFI package to root dir(/) of a USB flash driver,and insert the USB flash
drive to the motherboard;
b. Booting from the UEFI USB flash and enter the UEFI environment ;
c. Command with "SSD711x.nsh", flash UEFI rom to SSD7110 Controller and reboot.
3/9