Table of Contents
Advertisement
M
O
ANUAL
VERRIDE
If 110V power is not available to the coach, the Apex awning can still be safely
retracted using the manual override.
1.
The bypass is located inside the case, near the end cap. To access, remove the
large rubber plug on top of the awning located toward the rear of the case
on the motor side.
2.
Chuck the supplied 7mm hex key into a 3/8" battery powered drill.
3.
Insert the hex key into the manual override on the awning.
4.
Operate the drill in the direction shown in the diagram to close the awning.
Reverse the drill to open the awning.
5.
When done, reinsert the rubber plug.
7mm Hex
Manual Override
Open
Close
Lead Rail
LH Motor
Open
Close
RH Motor
RTA015a
APEX
7
Advertisement
Table of Contents
