Executing, Pausing, And Stopping Sequences - Kikusui PCR-WE series User Manual

Sequence Function

Executing, Pausing, and Stopping Sequences

After you have finished setting the steps and the sequence conditions, you can execute the sequence.
Press SEQ (SHIFT + SIM) > RUN (F1) to run the sequence.
You cannot run a sequence in the following situations.
• The voltage range is set to the L range and there is a step whose voltage exceeds the output voltage
setting range (switch the range to the H range, or set the output voltage so that it is within the L
range).
• The regulation adjustment or soft sensing compensation function is in use.
• The voltage or frequency is set to a value outside the corresponding limits.
• There is a step where the trigger wait setting (TRIG.IN) and the sudden phase change setting
(PHAS.CHG) are both turned on.
• The output impedance setting is out of range.
• The external analog input function (VPROG) is in use.
• The external analog input function (EXTDC) is in use, and the signal source is EXT.
• The sync function is running.
• Soft start and soft stop is in progress.
• Power line abnormality simulation is in progress.
Parameter
STOP(F2)
PAUSE(F4)
CONTINUE(F4)
You can also resume the execution of a paused sequence by applying a trigger signal.
Press OUTPUT while a sequence is running stops the sequence with the output turned off.
A sequence is complete when all steps are complete. When a sequence is completed, the product's
settings are those of the last step.
If the output is on in the last step of the sequence, the output will remain on when the sequence is
completed.
If the U phase is offset in the last step of the sequence, the offset (the U PH OFS icon) will remain even
when the sequence is complete. Be sure to press 1/2 > U PHASE on the sequence screen to clear the
offset. The icon will disappear when you clear the offset.
128
User's Manual
Title Description
Sequence Stops the running sequence (the output remains in the state of
step being run).
Pauses a sequence that is being executed
Resumes a sequence that has been paused
PCR-WE/PCR-WE2