Table of Contents
Advertisement
Sequence Function
Executing, Pausing, and Stopping Sequences
When the program and step settings are complete, register the program in the chain and execute the
sequence. You can pause or stop the sequence while it is running. By setting triggers
timing of the sequence can be controlled.
Registering the program in the chain
Program is executed in the order of registration in the chain.
1
Press Sequence > Initiate on the homepage.
The sequence execute screen will be displayed.
The same screen is displayed when Initiate is pressed on the program list screen
2
Swipe the display to the left, or press the → key.
The chain creation screen is displayed.
Swipe the list to the left when the created program is not fully displayed. When the program regis-
tered in the chain is not fully displayed, swipe the list to the left, or scroll the screen with the rotary
knob.
3
Press the program desired to be registered in the chain on the list of programs
already created.
The program is selected.
4
Press Add.
Program is registered in the chain.
5
Repeat Step 3 and Step 4 .
In the case of executing a sequence, the programs on the left side of the Chained List are executed
in order. Operation completed.
116
User's Manual
Unlock the chain and register it again in the following case:
• When wishing to change the order of the programs registered in the chain
Chain is unlocked in the following cases:
• When turning off the power supply of the PXB series
• When creating a new program
• When changing settings of/deleting a program registered in the chain or a program not reg-
istered in the chain
List of programs already created
Program name and execution time are disp
List of programs registered in the chain
Program name and execution time are disp
(p.
104), the start
(p.
102).
PXB series
Advertisement
Table of Contents
