Measurement Display
You can monitor the present output value. When the output is off, this is nearly 0.
You can change the phase to display for single-phase three-wire output and three-phase output.
Displaying the voltage
The measured voltage is displayed in the status, measured-value, and setting display area.
You can select whether to display the rms, peak, or average voltage.
Press V-MEAS (SHIFT+V) to select the item that you want to display.
For single-phase three-wire output and three-phase output, you can select to display the phase voltage or
line voltage (p.42).
Parameter
RMS(F1)
PEAK(F2)
DC(F3)
*1
LINE
(F4)
*1.
Only for single-phase three-wire output and three-phase output
Averaging voltage measurements
You can average the rms-voltage and average-voltage measurements and display the result.
Press V-MEAS (SHIFT+V) > 1/2 (F6) > AVERAGE (F4) to select whether to average the voltages.
Parameter
AVERAGE(F4) Average Count Values will be averaged.
PCR-WE/PCR-WE2
Title
V-Meas
ON(F2)
V-Line
OFF(F3)
Title
Description
Average count (moving average): 1 to 32
The voltage
Unit
Description
V rms
Displays the rms voltage
V pk
Displays the peak voltage
V dc
Displays the average voltage
V rms
Displays the line voltage
Displays the phase voltage
Basic Functions
(p.42)
61
User's Manual