Wireless Settings Screen - NETGEAR CG2003D User Manual

Gateway Interface Method
Select Add WPS Client at the top of the gateway menus.
1.
Click Next. The following screen lets you select the method for adding the WPS client.
2.
Select either Push Button or PIN Number. With either method, the gateway tries to
3.
communicate with the computer or wireless device, set the wireless security for wireless
device, and allow it to join the wireless network.
The PIN method displays this screen so you can enter the client security PIN number:
While the gateway attempts to connect, the WPS LED on the front of the gateway blinks
green. When the gateway establishes a WPS connection, the LED is solid green and the
gateway WPS screen displays a confirmation message.
Repeat to add another WPS client to your network.
4.

Wireless Settings Screen

The Wireless Settings screen lets you view or change the wireless network settings. If you
change the settings, note the new settings and save them in a secure location.
If you use a wireless computer to change the wireless network name
Note:
(SSID) or security options, you are disconnected when you click
Apply. To avoid this problem, use a computer with a wired
connection to access the gateway.
14 | Chapter 2. Wireless Settings
Wireless Cable Modem Gateway CG2003D User Manual
WPS Push button method
WPS PIN method