Logs - NETGEAR CG2003D User Manual

Logs

To access this feature you have to log in to the gateway with the MSO user name and its
default password changeme, or whatever new password you have set up.
A log is a detailed record of the Denial of Service (DoS) attacks directed at your network. You
can use e-mail notification to receive these logs in an e-mail message. If you do not have
e-mail notification set up you can connect to the gateway to view the logs.
To receive logs or alerts by email:
Select Content Filtering > Logs. The Logs screen displays.
1.
Enter the following information:
2.
Contact Email Address. Enter an email address to which the logs will be sent. Use a
•
full email address (for example, ChrisXY@myISP.com).
SMTP Server Name. Enter the outgoing SMTP mail server of your ISP (for example,
•
mail.myISP.com). If you leave this box blank, no alerts or logs will be sent.
Sender Email Address. Enter an e-mail address from which the logs will be sent.
•
Use a full e-mail address (for example, JohnXY@myISP.com).
Select the SMTP Server Authentication check box if authentication is required.
3.
Select the Email Alerts Enable check box to activate the e-mail alerts.
4.
Click Apply to save your settings.
5.
For information about event logs, see
24 | Chapter 3. Content Filtering and Firewall Rules
Wireless Cable Modem Gateway CG2003D User Manual
on page 36.
Event Log