NETGEAR CG2003D User Manual page 31

Wireless Cable Modem Gateway CG2003D User Manual
To set up port triggering:
Select Advanced > Port Triggering. The Port Triggering screen displays.
1.
For each port trigger that you would like to enable, enter the following settings in the Port
2.
Trigger List and enable the port trigger:
Trigger Range. The trigger range consists of the range of outgoing ports to be
•
monitored to trigger the incoming port forwarding rule:
Start Port. Enter the start port for the trigger range.
-
End Port. Enter the start port for the trigger range.
-
Target Range. The target range consists of the range of incoming ports to be opened
•
when triggered:
Start Port. Enter the start port for the target range.
-
End Port. Enter the start port for the target range.
-
Protocol. Select the protocol for the ports,:
•
TCP. Select TCP only.
-
UDP. Select UDP only.
-
Both. Select both TCP and UDP.
-
Select the Enable check box to activate the port trigger.
•
Perform one of the following actions:
3.
Click Apply to save your settings and activate the port triggers that you have enabled
•
in
step 2.
Click Delete to remove a port trigger that you can select by clicking the radio box next
•
to the port trigger that you want to delete.
Click Reset to return all trigger and target ranges to their default values of zero.
•
Chapter 3. Content Filtering and Firewall Rules | 31