Cabling the Gateway
Using the coaxial cable provided by your cable company, connect the gateway cable
1.
port (A) to your cable line splitter or outlet.
Figure 5. Gateway coaxial cable connection
Use the Ethernet cable that shipped with your gateway to connect a LAN port (B) to the
2.
Ethernet adapter in your computer.
Figure 6. Gateway Ethernet cable connection
Connect the power adapter to the gateway, and plug it into an outlet.
3.
Wait about 30 seconds for the lights to stop blinking, and then verify the following:
4.
The power LED is lit.
The cable link LED is solid green, indicating a link has been established to the
cable network.
8 |
Chapter 1. Connecting the Gateway to the Internet
A
Wireless Cable Modem Gateway CG2003D User Manual
B