Viewing Or Changing Wireless Settings - NETGEAR CG834WG User Manual

Wireless Cable Modem Gateway CG834WG User Manual

Viewing or Changing Wireless Settings

Your CG834WG Gateway has wireless settings disabled by default.You can view or change the
wireless settings for the gateway. If you want to make changes, make sure to note the current
settings first. See the "SSID and Wireless Security Settings Form" on page
1. Log in to the gateway using its default address of
the unit is currently configured Use the default user name of admin and default password of
password, or whatever password you have set up.
2. Select Wireless Settings to go to the Wireless Settings screen.
3. To view or change wireless settings you must first select the Enable Wireless Access Point
check box.
Figure 2-1
2-4
http://192.168.0.1
You must select this check
box in order to set up
wireless connectivity and
wireless security.
When the wireless access
point is enabled, the default
wireless security setting is
128-bit WEP.
v1.0, October 2007
2-3.
or at whatever IP address