Wireless Cable Modem Gateway CG2003D User Manual
Wireless Guest Network Screen Fields
Guest LAN Settings
Current Guest Network. You can select a guest network from the drop-down list.
•
DHCP Server. Select whether or not the DHCP server is enabled for the currently
•
selected guest network.
IP Address. Enter the IP address for the guest network. The default IP addresses are as
•
follows:
192.168.1.1
-
192.168.2.1
-
192.168.3.1
-
The subnet mask has a permanent address of 255.255.255.
Lease Pool Start and Lease Pool End. Enter the lease pool start and end IP address for
•
the guest network. The default lease pool start IP addresses are as follows:
192.168.1.10 and 192.168.1.99
-
192.168.2.10 and 192.168.2.99
-
192.168.3.10 and 192.168.3.99
-
Lease Time. Enter the lease time for the guest network. The default is 86400 seconds
•
(24 hours).
Enable Guest Network check box.
•
Guest Network Name (SSID). You can use this field to change the SSID for the selected
•
guest network.
Set up Wi-Fi Multimedia
Wi-Fi Multimedia (WMM), also referred to as Wireless Multimedia, is a subset of the 802.11e
standard. WMM allows wireless traffic to have a range of priorities, depending on the kind of
data. Time-dependent information, like video, audio, or voice have a higher priority than
normal traffic.With WMM you can configure quality of service (QoS) to prioritize multimedia
traffic in four access categories: voice, video, best effort, and background. For WMM to
function correctly, wireless clients have to support WMM.
Chapter 2. Wireless Settings
| 21