NETGEAR CG2003D User Manual page 22

To configure WMM:
Select Setup > Wi-Fi Multimedia. The Wi-Fi Multimedia (WMM) screen displays.
1.
Enter the following WMM settings:
2.
WMM Support. Select the WMM mode:
•
On. WMM is enabled
-
Off. WMM is disabled.
-
No-Acknowledgement. When the wireless communication quality is good, you do
•
not need an acknowledgement message (ACK) to confirm the reception of a packet.
Disabling acknowledgement messages might improve the efficiency of packet
transmission. When the wireless communication quality is poor, enable
acknowledgement messages so that you are notified when a package is lost.
On. Acknowledgement messages are enabled.
-
Off. Acknowledgement messages are disabled.
-
Power Save Support. Select the power save mode to conserve battery power in
•
smaller devices that are connected to the gateway:
On. Power save support is enabled.
-
Off. Power save support is disabled.
-
Click Apply to save your settings.
3.
22 | Chapter 2. Wireless Settings
Wireless Cable Modem Gateway CG2003D User Manual