Side - Mitsubishi MELSEC iQ-F series User Manual

No. Name
[9] Output connector
[10] DIN rail mounting hook
[11] SD memory card disable switch
[12] SD memory card slot
[13] RUN/STOP/RESET switch

Side

Left side/right side
[1]
No. Name
[1] Expansion adapter connector cover
[2] Subsequent extension connector cover
[3] DIN rail mounting groove
[4] Nameplate
[5] Genuine product certification label
Products that do not have the genuine product certification label or nameplate are not covered by the
warranty.
1 OUTLINE
18
1.1 Part Names
Description
Connector for connecting output signal cables.
Hook for mounting a CPU module on a DIN rail of DIN46277 (35 mm wide).
Switch for disabling access to the SD memory card when the card is to be removed.
Slot for inserting an SD memory card.
Switch for operating the CPU module. (Page 121 Methods of running, stopping, and resetting)
RUN: Runs the program
STOP: Stops the program
RESET: Resets the CPU module (hold the switch on the RESET side for approximately 1 second.)
Description
Cover for protecting the expansion adapter connector.
Cover for protecting the subsequent extension connector.
The module can be installed on a DIN46277 rail (35 mm wide).
The product model name, manufacturer's serial number, power supply specifications, and MAC
address are shown.
Genuine product certification label to prevent counterfeiting
[2]
[3]
[4]
[5]