Amd Eyefinity Multiple Displays Configuration; Setting Up Amd Eyefinity Using Quick Setup - IBASE Technology SI-324 User Manual

B.

AMD Eyefinity Multiple Displays Configuration

AMD Eyefinity is applicable to SI-61S; it is a technology that allows two or
more displays to be grouped together to form a single large desktop. Once
AMD Eyefinity is configured, the final resolution is the horizontal and/or
vertical sum of the individual monitors.
The following AMD embedded configurations are used for the demonstration
of AMD Eyefinity configuration in this section.
Platform: AMD Embedded V1000 Reference Platform
APU: AMD Embedded V1000 Processor with AMD Radeon Vega Graphics
AMD Driver: 17.40.3775.1003.180508a-328988C-AES
B.1

Setting Up AMD Eyefinity Using Quick Setup

B.1.1 AMD Eyefinity Quick Setup with All Displays
This section describes how to set up AMD Eyefinity with the Quick Setup
option, where all the connected displays will be part of the AMD Eyefinity
Display Group created.
As AMD Eyefinity Quick Setup creates an Eyefinity Display Group based on
the current (default) display configuration, ensure that the displays are
arranged in the desired supported order first under extended desktop in the
Operating System's display settings.
In the below example, Eyefinity Quick Setup is used to create a 3x1 AMD
Eyefinity Display Group. So, arrange the displays in a 3x1 configuration in
extended desktop before configuring AMD Eyefinity with Quick Setup.
To set up AMD Eyefinity with Quick Setup:
1. Open AMD Radeon Settings: Right-click on the desktop and select AMD
Radeon Settings.
SI-324 User Manual
Appendix
41